Novation Bass Station II Synthesizer
3.199 kr.
Afhent på lager | 0,- |
GLS - Pakkeshop | 0,- |
GLS - Erhvervslevering | 59,- |
GLS - Hjemmelevering | 99,- |
Danske Fragtmænd | 299,- |
Tilbehør der passer til:
- 25 anslagsfølsomme tangenter
- Fantastisk bass synthesizer til pengene
- Analog Monofonisk Synthesizer
- Efterfølgeren til den ikoniske Bass Station
- 2 x VCO oscillator og 1x sub oscillator.
- 2 x envelope og 2 x LFO
Novation Bass Sation II
Novation har valgt at lave den opfølger på den ikoniske synth fra 1993. Synthen kommer i et opdateret design og med en hands on funktionalitet, der passer perfekt til live gigs eller til hjemmestudiet.
Med Novation Bass station II får du en synthesizer der leverer en unik og spændende lyd og giver dig mulighed for at skabe et utal af lyde til en skarp pris.
- Mono 6.3 jack output og input
- 64 presets og 64 bruger presets
- Stereo 6.3 jack hovedtelefon output
- USB ind
- Dimensioner 45,5 x 27 x 8,3 cm
Varenr.: | ALG-496796 |
EAN: | 815301000181 |
Vægt | 2,5 |
Specifikationer
- 25 note synth-action keyboard
- Aftertouch can be assigned to modulate:
- Filter frequency
- LFO 1to Osc pitch
- Osc 2 speed
- Pitch wheel
- Modulation wheel can be assigned to:
- LFO 2 to filter frequency
- LFO 1 to Osc pitch
- Osc 2 pitch
- Octave up/ down buttons
- 64 factory presets
- 64 slots for user patches (and patch dump facility for storing more)
- Master volume dial
Inputs and Outputs
- USB MIDI (for connecting & powering Bass Station II via host computer)
- Mono output on 1/4" TRS jack
- Headphone output on 1/4" TRS jack
- External input on 1/4" TRS jack
- Sustain pedal input on 1/4" TS jack
- MIDI IN / MIDI OUT ports on 5 pin din
- DC power input
- Switch between power off / DC powered / bus powered
Synth Engine Oscillators
- Osc 1
- Osc 2
- Sub Osc (3)
- Noise generator
Osc 1 & 2 Select between waveforms:
- sine
- triangle
- sawtooth
- square/variable pulse width
Features
- Sync 1 & 2
- Detune
- Octave range
- Pitch bend
- Pitch modulation from Mod Envelope and/or LFO 1
- Pulse width modulation from Mod Envelope and/or LFO 2
Sub Osc (3) which is tracked to Osc 1 Select independently between waveforms:
- Sine
- Square
- Narrow pulse
Features
- All modulation and tuning tracked to Osc 1
- Independent octave select
Mixer
- Osc 1 level
- Osc 2 level
- Sub Osc level
- Noise generator level
- Ring modulation depth
- External signal level
Filter Two filter types
- Acid type (diode ladder filter design)
- Classic type (derived from original Bass Station)
Features
- Cutoff
- Resonance
- Overdrive
- Filter frequency to Mod Envelope depth
- Filter frequency to LFO 2 depth
Select 'Classic' filter between:
- Low pass
- Band pass
- High pass
- 12dB slope
- 24dB slope
Envelopes Two ADSR Envelopes (Attack/Decay/Sustain/Release)
- Amp Envelope
- Mod Envelope
- Combined control of both Envelopes
Select triggering mode between:
- Single trigger (holds envelope state when new note is played)
- Multi trigger (re-triggers with every new note played)
- Autoglide (engages portamento)
There is also a VCA limiter
LFO Two LFOs each selectable between:
- Triangle
- Sawtooth
- Square
- Sample and hold
- Both LFOs independently adjustable between rate and delay time
- Key sync LFO 1 & 2
- LFO slew on LFO 1& 2 (low pass filter on the LFO waveform)
Effects
- Distortion send
- Oscillator filter mod amount (FM effect created by Oscillator 2 modulating filter freq)
Step Sequencer/Arpeggiator Arpeggiator
- Up to 32 different patterns
- Select between 1-4 octave range
- Swing function
- Select direction:
- up
- down
- up / down 1
- up / down 2
- As played
- Random
- Latch (hold the arpeggiator)
Step Sequencer
- Up to four sequences
- Assign one of 32 preset rhythms or create your own
- insert rests or legato (slide)
- Sequencer re-trigger function
Portamento
- Adjust glide time
- Single trigger or re-trigger modes
- Integrate into step sequencer and arpeggiator
Power Requirements
- USB bus powered
- 9V DC power supply included
- Maximum power consumption 9V DC 300mA
Product Dimensions
- 457mm (18”) width x 273mm (10.75”) depth x 76mm (3”) height